INSTEK GPR-3060D CALIBRATION and INSTEK GPR-3060D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPR-3060D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK GPR-3060D   Description / Specification:    
INSTEK GPR-3060D 30V 6A Single Output Digital DC Power Supply

The GW Instek GPR-3060D is a single output, 180W, linear DC power supply suitable for high-end precision bench top applications. Low load and line regulation for both constant voltage and constant current mode ensure reliable, predictable output. Overload and reverse polarity protection as well as internal selection for dynamic or constant load are standard. Specifications. DC Output: 0 to 30 V / 0 to 6 A. Constant Voltage (CV) Operation Line Regulation: <= 0.01% + 3 mV. CV Operation Load Regulation: <= 0.01% + 5 mV (rating current < 10 A). CV Ripple & Noise: <= 1 mVrms 5 Hz to 1 MHz. CV Recovery Time: < 100 µS ( 50% load change, minimum load 0.5A ). CV Output range: 0 to rating voltage continuously adjustable. Constant Current (CC) Operation Line Regulation: <= 0.2% + 3 mA. CC Operation Load Regulation: <= 0.2% + 3 mA. CC Ripple Current: <=3 mArms. CC Output Range: 0 to rating current continuously adjustable. Meter 3 1/2 digits 0.5" LED display. Meter Accuracy: ±( 0.5% of rdg + 2 digits ).



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPR-3060D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your INSTEK GPR-3060D CALIBRATION and/or INSTEK GPR-3060D 30V 6A Single Output Digital DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: